With the growing popularity of digital transmission, FLYWOO introduces an innovative solution for 1-2S HD Micro Drones.

This full-featured HD AIO solution integrates a Type-C interface, equipped with a high-performance F405 BGA MCU, and offers enoug Uart to meet the meet all you need. The GOKU F405 HD V2 AIO features a built-in 9V 2A BEC module, effectively preventing power cuts in the O3 Air unit due to insufficient voltage. 

Additionally, it comes with a serial ELRS 2.4G receiver, an 8MB black box, a barometer, and a current sensor, specifically designed for HD VTX. Its socket-style motor connections and plug-and-play O3 design significantly simpliy the installation and debugging process, achieving a perfect blend of efficiency and convenience.
Highlights：
Type-C Design: Utilizes Type-C , more convenient and reliable connections.
New Power Supply : Features 9V 2A BEC , effectively preventing power outages in the O3 Air unit due to voltage dropping .
Plug-and-Play O3 Port: Direct plug design for O3 air unit eliminates complex soldering steps
Motor Socket Design: Adopts socket connections for motors to facilitate quick replacements and upgrades.
Multifunctional Design: Integrates a serial ELRS 2.4G receiver, 8MB black box, barometer, and current sensor, reserves 2 full UARTs and 1 standard SBUS port, supporting connections with various devices like GPS, HD VTX, and external receivers.
 
GOKU F405 HD 1-2S ELRS AIO V2
GOKU F405 1-2S 12A AIO ELRS
Firmware:
FLYWOOF405S_AIO
FLYWOOF405S_AIO
BEC:
5V 2A/9V 2A
5V 2A
Flash:
8M
8M
LED:
2*WS2812
2*WS2812
Barometer:
DPS310/SPL06
DPS310/SPL06
Gyro:
ICM42688P
ICM42688P / MPU6000
Motor:
M1-M4 OUTPUT I2C: SCL/SDA
M1-M4 OUTPUT I2C: SCL/SDA
Uarts:
1,2,3,4,5,6
1,2,3,4,5,6
connector：
Type-C
Micro
OSD:
NO
AT7456E
Hole:
25.5*25.5-3mm
25.5*25.5-3mm
Size:
30*30mm
30*30mm
Weight:
4.9g
4.1g
Specifications：
BF Flight Controller Firmware: FLYWOOF405S_AIO
INAV Firmware: FLYWOOF405HD
MCU: STM32F405BGA
BEC:  5V 2A/9V 2A 
Flash:  8M
LED: 2*WS2812
Barometer:  DPS310/SPL06
Gyro:  ICM42688P / MPU6000
Motor: M1-M4 OUTPUT I2C: SCL/SDA
Uarts: 1,2,3,4,5,6 
connector： Type-C 
OSD: NO
Hole:  25.5*25.5-3mm 
Size:  30*30mm 
Weight: 4.9g
Onboard 4in1 ESC
Built-in 1S/2S 12A BL_S 4in1 ESC
Support Oneshot125, Oneshot42, Multishot,
Dshot150, Dshot300, Dshot600
Input Voltage: 1-2S Lipo
Firmware: BLHELI_S
Firmware: Z_H_30_REV16.7
ELRS2.4G RX: (optional)
ESP8285 MCU
SX1280IMLTRT RF Module
Frequency Range: 2400 MHz to 2500 MHz
Maximum receive refresh rate: 500Hz
Minimum receiver refresh rate: 25Hz Seiral:
UART 1
Firmware: Flywoo EL24P 2400 RX
Version: 3.X.X
In the Box
1x XT30 Power Cable
1x Flywoo ELRS 2.4g Minimortal PCB T Antenna UFL(only ELRS Version)
1x DJI O3 Connection Cable
1x PH 2.0 Battery Lead
1x capacitor 
4x JST Straight Socket
4x M2*10 screw
4x M2 nuts
4x M2 shock-absorbing ball